Installation Options:

tcs06332 ~ Anemometer Transmitter Kit

For use with Wireless Vantage Pro2. Allows you to locate the anemometer independently from the rain collector, up to 300 m away from the console/receiver. For longer distances, add one or more wireless repeaters. Kit includes transmitter inside weather-resistant shelter, solar panel, mounting hardware, and battery.

$195.00 us

tcs06610 ~ Solar Power Kit for Wireless Vantage Pro2

Compatible with both original Vantage Pro and Vantage Pro2.

$175.00 us

For mounting solar radiation sensor and/or UV sensor on Vantage Pro and Vantage Pro2 integrated sensor suite. Rigid shelf with anodized aluminum posts and stainless steel hardware attaches easily next to the rain collector on the outside of the integrated sensor suite.

Compatible with both original Vantage Pro and Vantage Pro2.

$25.00 us

tcs07702 ~ Sensor Mounting Arm

For optimal positioning, mount the Anemometer, Radiation Shield, Solar Radiation Sensor, Leaf Wetness Sensor and UV Sensor on our Sensor Mounting Arm. Can also be used to attach a Rain Collector on a rain collector shelf. Aluminum arm is white powder coated for added durability. Includes mounting hardware and ground wire.

Compatible with both original Vantage Pro and Vantage Pro2.

$65.00 us

tcs07704 ~ Rain Collector Shelf

Provides a horizontal surface for mounting the Rain Collector. May be used with Sensor Mounting Arm or mounted on other surfaces. Aluminum shelf is white powder coated for added durability.

Compatible with both original Vantage Pro and Vantage Pro2.

$35.00 us

tcs07707 ~ Solar Power Kit for Cabled Vantage Pro2

Powers both the console (or Weather Envoy) and the outdooor sensors. Includes solar panel, regulator circuit, rechargeable battery, and 20' (6 m) cable.

Compatible with both original Vantage Pro and Vantage Pro2.

$300.00 us

tcs07714 ~ Radiation Shield

The most effective passive shelter available. Protects your Temperature or Temperature/Humidity Sensor from solar radiation and other sources of radiated and reflected heat. Multi-plate construction for maximum airflow. Asssembly required. May be used with Sensor Mounting Arm or mounted on metal pipe or wood surface.

Use for Wizard II and Monitor II stations.

$65.00 us

tcs07716 ~ Mounting Tripod

Optional tripod makes installation even easier. Brackets at the base of each leg tilt to mount on your roof or uneven terrain. Made of galvanized steel. Includes two .92 m -long poles, which may be used separately or together to make a single 1.77m- long pole.

Compatible with both original Vantage Pro and Vantage Pro2.

$65.00 us

tcs07717 ~ Mounting Pole Kit

Poles and hardware for mounting Vantage Pro integrated sensor suite. Two poles join with connector to make a single 37-1/2 (95 cm) long pole.

One pole is 19-1/2 (0.50 m) long. The other is 21 (0.53 m) long. Outside diameter of both is
1-5/16.

Compatible with both original Vantage Pro and Vantage Pro2.

$35.00 us

tcs07720 ~ Rain Collector Heater

Use in cold climates to measure freezing rain or the moisture content of snowfall. Includes 24-watt, 24-volt heater with thermal cut-off switch, control unit, insulating reflective blanket, and AC-power adapter and 50' (15 m) cable.

Not for use with Solar Power Kit.

$175.00 us

tcs07724 ~ Complete System Shelter

To locate your weather station console and other components outside, use our Complete System Shelter. Weather-resistant NEMA 4X enclosure provides protection from the elements for all of the following:

1. Vantage Pro2 console or console/receiver with WeatherLink data logger.

2. Alarm Output Module or Timer.

3. Short-Range Modem, spread spectrum radio modem, UHF radio modem, or cellular phone modem with radio surge protector.

4. Weather Wizard III or Weather Monitor II console with WeatherLink data logger, protected junction box, regulator circuit from Solar Power Kit and 6.5-Amp-Hour Battery.

Includes ground wire. Dimensions: 15.5 x 7.75 x 13.5 ( 395 x 195 x 345 mm).

$275.00 us

tcs07728 ~ Multi-Purpose Shelter

The Multi-Purpose Shelter gives you a number of different outdoor installation options. Use it to shelter either of the following sub-systems:

1. Console (except Vantage Pro2 or original Vantage Pro console) with junction box (or Protected Junction Box or sensor interface module) and link isolator or Short-Range Modem.

2. Spread spectrum or UHF radio modem with timer.

3. Alarm Output Module with sensor interface module or Interface Cable Adapter Module.

Includes 16' (5 m) ground wire. Dimensions: 3.75 x 9.5 x 12.5 (95 x 240 x 320 mm).

$85.00 us

tcs07736 ~ Alarm Output Module

To send signals to automatically start or stop devices such as irrigation systems, heaters, or fans, use our Alarm Output Module. The Alarm Output Module can directly control devices such as irrigation controllers and thermostats. To switch power to heaters, motors, or other high-power equipment, you will need to add electrical relays (not available from Davis Instruments).

For use with GroWeather, Energy EnviroMonitior, or Health EnviroMonitor. For complete details, look under More Info for a copy of our Alarm Output Module Supplement.

US version only.

$78.00 us

tcs07747 ~ Daytime Fan Aspirated Radiation Shield Kit

Add the benefits of fan aspiration to your wireless or cabled Vantage Pro2 or Pro2 Plus. Half the cost of our 24-hour fan aspirated radiation shield, but nearly 75% as effective in reducing the effects of daytime radiation. Solar-powered fan runs during the day. Since there is no backup battery, the fan will cease running when night falls and the effects of radiation are less.

Kit includes fan, solar panel, additional radiation shield plates, and hardware.

Compatible with Vantage Pro2 only; not compatible with original Vantage Pro.For original Vantage Pro.

$125.00 us

tcs07764 ~ Link Isolator Kit for WeatherLink®

For upgraded protection against the electrical disturbances caused by ground offsets or static charges, install the Link Isolator Kit between the WeatherLink data logger and your computer. Uses optical coupling of signals to prevent lockups of the weather station console and possible damage to the console, data logger, and PC. Recommended when the console and the computer are not grounded or are connected to two different grounds. Includes 40 ft (12 m) cable and power adapter.

For use with the Perception, Weather Wizard III, and Weather Monitor II only.

$55.00 us

tcs07767 ~ Surge Protector

For upgraded protection against lightning-induced power surges, power-cross conditions, and ground potential rises, use Surge Protectors with any of our weather stations. For installation on cable runs between:

1. Sensor and junction box or sensor interface module. 2. Console and junction box or sensor interface module.

Use one Surge Protector for every two wires. Stripping of wires is required. Each item has the following number of wires:

Junction Box or Sensor Interface Module (8)
Anemometer (4)
Leaf Wetness Sensor (3)
Rain Collector (2)
Solar Radiation Sensor (3)
Temperature Sensor (2)
Stainless Steel Temperature Probe (2)
Temperature/Humidity Sensor (5)
UV Sensor (3)

$16.00 us

tcs07768 ~ Surge-Protector Shelter, Small

Weather-resistant shelter for Surge Protectors (sold separately). Houses up to two Surge Protectors. Includes ground wire.

Measures 3.5 x 5.75 x 2.25 (90 x 145 x 55 mm).

$24.00 us